Cleaning Honeycomb Assemblies; Cleaning Under Merchandiser; Removing Scratches From Bumper - Hussmann RI1 Installation And Operation Manual

M
5-4
AINTENANCE

CLEANING HONEYCOMB ASSEMBLIES

RI4, RI4N
Honeycombs should be cleaned every six months.
Dirty honeycombs will cause merchandisers to
perform poorly. The honeycombs may be cleaned
with a vacuum cleaner. Soap and water may be
used if all water is removed from the honeycomb
cells before replacing. Be careful not to damage
the honeycombs.
1. Remove product to cooler.
2. D
ISCONNECT THE ELECTRICAL POWER TO THE
.
MERCHANDISER
3. Compress the honeycomb and remove it
from its retainer.
4. Clean and dry the honeycomb.
5. After cleaning, replace in reverse order.
6. Turn on power to merchandiser.
7. Once operating temperature is reached, return
product from cooler.
Honeycomb
/N 0446551
CLEANING UNDER MERCHANDISERS
Remove splashguards not sealed to floor. Use a
vacuum with a long wand attachment to remove
accumulated dust and debris from under the
merchandiser.

REMOVING SCRATCHES FROM BUMPER

Most scratches and dings can be removed using
the following procedure.
1. Use steel wool to smooth out the surface area
of the bumper or top rail.
2. Clean area.
3. Apply vinyl or car wax and polish surface for
a smooth glossy finish.