Turn Signal Light Bulb Replacement (For 6 V Model); Turn Signal Light Bulb Replacement (For 12 V Model) - Yamaha AG200F Owner's Manual

For 12 V model
2
1
1. Bulb
2. Lense
3. Screw (×2)
3. Install a new bulb by pushing
it inward and turning it clock-
wise.
4. Install the lense and tighten
the screws.
cC
Do not over-tighten the screws as
the lense may break.
PERIODIC MAINTENANCE AND MINOR REPAIR
For 6 V model
3
2
1
1. Lense
2. Bulb
3. Screw
Turn signal light bulb
replacement
(For 6 V model)
1. Remove the screw and the
lense.
EC000108
2. Remove the defective bulb by
pushing it inward and turning
it counterclockwise.
3. Install a new bulb by pushing
it inward and turning it clock-
wise.
4. Install the lense and tighten
the screw.
For 12 V model
3
1. Lense
2. Bulb
3. Holder
EAU01095*
Turn signal light bulb
replacement
(For 12 V model)
6-31
2
1
1. Remove the lense by pushing
down lightly and pulling it out-
ward.
2. Push the bulb inward and turn
it counterclockwise to remove.
3. Place a new bulb in the socket.
Push the bulb inward and turn
it clockwise until it engages
into the socket.
4. Install the holder and the
lense.
1
3
2
3
4
EAU01731*
5
6
7
8
9