PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw ( 2)
Turn signal and tail/brake light
bulb replacement
1. Remove the screws and the lens.
6
2. Push the bulb inward and turn it
counterclockwise.
1. Screw ( 3)
3. Place a new bulb in the socket.
EAU00855*
Push the bulb inward and turn it
clockwise until it engages into the
socket.
4. Install the lens and the screws.
CAUTION:
@
Do not over-tighten the screws as
the lens may break.
@
Troubleshooting
Although Yamaha motorcycles receive
a rigid inspection before shipment from
the factory, trouble may occur during
operation.
Any problem in the fuel, compression,
or ignition systems can cause poor
starting and loss of power. The trouble-
shooting chart describes a quick, easy
procedure for making checks.
If your motorcycle requires any repair,
bring it to a Yamaha dealer. The skilled
technicians at a Yamaha dealership
have the tools, experience, and know-
how to properly service your motor-
EC000108
cycle. Use only genuine Yamaha parts
on your motorcycle. Imitation parts may
look like Yamaha parts, but they are of-
ten inferior. Consequently, they have a
shorter service life and can lead to ex-
pensive repair bills.
6-31
EAU01008