Bumper Installation Instructions - Hussmann R3 Installation And Operation Manual

Refrigerated service and/or prep with refrigerated self service front

Hide thumbs Also See for R3:

Table of Contents

Bumper installation instructions

Step 1: Make sure the aluminum channel and end caps

are installed.

Step 3: Starting on one end: while inserting the bumper,

push it up against the end cap to prevent

the bumper from shrinking after installation

(when it gets cold).

installation (cont'd)

Step : Use silicone lubricant to help the

bumper slide into the channel.

Step 4: As you insert the bumper into the channel with

one hand, pull the bumper toward you with

the other to open the inside lips. Slowly

apply pressure by rolling the bumper into

the track.

igfP-R3, R3P-0608

Table of Contents

R3p