Advertisement
Vertical Glass Service Merchandisers Joining Instruction
Adding Trim to the
Joint and Front Glass
While the silicone is still wet,
18
insert the Interior and
Exterior Trim (Items – 23
and 24) into the silicone that
was applied in Step 17.
Apply tape over the trims to
hold them in place as the
silicone dries for 24 hours.
See Figure 12,
Details M, N and O for
this procedure.
Exterior
24
Trim
2
Gasket
Silicone
4
Glass
Add silicone to both interior and
exterior of glass next to the gasket
Detail N.
Push trim into silicone
Figure 12. Sealing and adding trim to the Front Joint of Case
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
Note: Cases are shown apart for
clarity of trim and location
Silicone
CASE 1
4
Glass
Detail M.
Tape
Detail O.
P/N 0430502
CASE 1
Interior
Trim (Shorter)
23
CASE 2
Tape
Cover trim with tape
CASE 2
11
Advertisement
