Customizing Wash Cycles - Fisher & Paykel WA3927G1 Installation Instructions And User Manual

To customize a cycle
You can program your WashSmart washer to remember the wash options you prefer for each
wash cycle. For instance, you may want to set the REGULAR cycle to default to a WARM/COLD
wash or set HEAVY cycle to include a SOAK.
Touch POWER.
1
Touch and hold the button of the wash cycle you want to customize for 3 seconds, eg REGULAR.
2
You will hear a beep and the display will show "SEt". The light above the cycle button will also flash.
Select your preferred setting, and any other options you wish to customize for this cycle.
3
Touch the button of the wash cycle you are customizing again, eg REGULAR, to store your
4
customized cycle (a long beep will sound to confirm the changes have been saved).
To change your customized wash cycle simply repeat these steps or to change back to the
settings the washer left the factory with refer to page 36.
Fig.31 Customizing a wash cycle, eg REGULAR cycle

Customizing wash cycles

US
31
CA