Fisher & Paykel WA3927G1 Installation Instructions And User Manual page 31

Options
Bleach
If you wish to use bleach, ensure the BLEACH option is selected.
Your washer will adjust the cycle so that the bleach is used
correctly and safely (refer to page 23).
Softener
If you wish to use fabric softener, ensure the SOFTENER option is
selected. This will adjust the rinse part of the cycle so that softener
is dispensed correctly (refer to page 23).
Soak
Use the SOAK option to soak clothes at the middle of the wash
phase. Ensure items are colorfast before using SOAK.
When you select the SOAK option your washer will soak your wash load for a period of 2 hours
before completing RINSE and SPIN. During SOAK your washer will agitate for a few seconds
every minute.
If you select both the SOAK option and the QUICK cycle at the same time, soak time will be
reduced to 1 hour.
To exit SOAK, touch START/PAUSE and select RINSE (using the WASH ADVANCE button). Change
the spin speed if necessary (eg select SLOW if washing delicate or creasable items) and touch
START/PAUSE.
Important!
DO NOT use your washer to soak items in bleach or sanitizer, and if you've soaked items in a
bucket, do not tip the contents of the bucket into your machine. The chemicals in these products
are very corrosive to metal and plastic surfaces and can damage your washer. Rinse and wring
items out thoroughly before placing them in your machine.
Delay Start
The DELAY START option can delay the start of the wash cycle by 5 minutes up to 18 hours.
This can be useful to time your washing to finish when you arrive home from work, or to start
once you have finished in the shower. Simply touch the MORE
your desired delayed start time, or to turn delay start off. Touch START/PAUSE to confirm your
selection and start the countdown.
Note: we suggest that you avoid using DELAY START for damp, non-colorfast items as this may
cause dye run to occur.
Clothes care safeguards
To avoid accidentally damaging your clothes there are a few options that your washer will not
accept. For example, you cannot select a HOT wash on the DELICATE or EASY IRON cycles.
Wash options
Fig.29 Options button
button to scroll through to
US
29
CA