Fisher & Paykel WA3927G1 Installation Instructions And User Manual page 30

Wash options
US
28
CA
Spin speed
Your washer offers 3 spin speeds: FAST (maximum 1100 rpm), MEDIUM
(670 rpm) and SLOW (330 rpm), plus an additional NO SPIN option. The
default spin speed for each cycle can be changed. Simply increase or
decrease your spin speed by touching the SPIN SPEED button.
Not all spin speed options are available on some cycles for best clothes
care (eg DELICATE cycle).
Use the NO SPIN option to:
Remove drip dry garments from a mixed load before you proceed the
■ ■
washer to its final spin.
Minimize the clothes wrinkling when they are left to sit in the bottom of
■ ■
the basket at the end of the cycle.
When you have selected NO SPIN, the cycle will end after the rinse, allowing you to remove
drip dry items. Once drip dry items have been removed, touch POWER, select the SPIN cycle
(change the SPIN SPEED if necessary, eg select SLOW for delicate or creasable items) and touch
START/PAUSE.
Note: your washer will optimize the spin speed according to the level of out of balance in the load.
Wash advance
Sometimes you may not need to run a full wash cycle. Use WASH ADVANCE
to advance the current cycle or to start a cycle at a particular stage, ie to
complete a rinse and spin, or to perform a spin only.
Fig.27 Selecting the
NO SPIN option
Fig.28 Advancing
the wash cycle