Installer Checklist - Fisher & Paykel MINIMAL VB60SDEB1 Installation Manual

IMPORTANT!
Read all installation instructions in this manual to see if the unit has been correctly installed.
Ensure that installation has been completed correctly before use.
Ensure that:
F the vacuum seal drawer is level and securely fitted to the cabinetry to
F any internal packaging has been removed from the drawer
the isolating switch is accessible by the customer
F
F the bottom shelf can fully support the total weight of the combined appliances
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
14

INSTALLER CHECKLIST

FP WARMER DRAWER INTERFACE LOGIC_V1
1h
Test operation:
2h
Open the drawer.
F
1h
F Press the
Shut the drawer.
F
2h
F After 5-10 minutes, open the drawer to feel the internal surfaces of drawer is slightly
warmed.
F Press the
ICE AND WATER INTERFACE COMPONENTS
All bezels capable of glowing white and red
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
ICE AND WATER INTERFACE COMPONENTS
All bezels capable of glowing white and red
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
PRODUCT OFF
PRODUCT OFF
button to turn the vacuum seal drawer on.
button to turn the vacuum seal drawer off and shut the drawer.
USER PRESSES ON/OFF BUTTON
ALL OT
1h 1h
TEMPER
MEDIUM
2h 2h
HEATIN
USER PRESSES ON/OFF BUTTON
ON/OF
AGAIN
ALL OT
1h 1h
TEMPER
MEDIUM
2h 2h
HEATIN
ON/OF
AGAIN
1h
THE THREE TEMPERATURE BUTTONS WORK
ONLY ONE CAN BE SELECTED AND SHOW
2h
THE OTHER TWO BUTTONS SHOW WHITE
1h
THE THREE TEMPERATURE BUTTONS WORK
ONLY ONE CAN BE SELECTED AND SHOW
2h
THE OTHER TWO BUTTONS SHOW WHITE
THE TWO TIMER BUTTONS WORK AS A UN
1h
ONLY ONE CAN BE SELECTED AND SHOW
THE OTHER BUTTON SHOWS WHITE
2h
THE TWO TIMER BUTTONS WORK AS A UN
1h
ONLY ONE CAN BE SELECTED AND SHOW
THE OTHER BUTTON SHOWS WHITE
2h