Yamaha Tenere 700 Owner's Manual page 27

Average fuel consumption display
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG". To switch the fuel consumption
measurement units, push the top set
button until the measurement units
change.
 "AVE_ _._ km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": the average
amount of fuel necessary to travel
100 km.
 "AVE_ _._ MPG": the average dis-
EAU90691
tance that can be traveled on 1.0
US.gal of fuel.
TIP
 To reset the average fuel con-
sumption, select it and while the
digits flash, push the bottom set
button until it is reset.
 After resetting, "_ _._" is shown
until the vehicle has traveled some
distance.
Coolant temperature display
1
1. Coolant temperature display
This display shows the coolant tem-
perature from 104 °F to 242 °F in 1 °F
increments.
Instrument and control functions
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-39.)
TIP
 When the coolant temperature is
 The coolant temperature varies
Air temperature display
EAU90710
1. Air temperature display
This display shows the air temperature
from 16 °F to 210 °F in 1 °F increments.
4-9
below 104 °F, "Lo" will be dis-
played.
with changes in the weather and
engine load.
1
4
EAU90682