Before Installing The Shelf Brackets; Required Equipment; Installing The Shelf Bracket Kit Into A Two-Post Telco Rack - Cisco MDS 9100 Series Installation Manual

Appendix A Cabinet and Rack Installation

Before Installing the Shelf Brackets

Before installing the shelf brackets, inspect the contents of your kit.
shelf bracket kit.
Table A-1
Quantity
2
2
1
2
16
16

Required Equipment

You need the following equipment for this installation:
•
•

Installing the Shelf Bracket Kit into a Two-Post Telco Rack

Figure A-1
Figure A-1
1
1 Rack-mounting rail (2x)
2 Shelf bracket (2x)
OL-16187-01
Contents of Shelf Bracket Kit
Part Description
Slider brackets
Shelf brackets
Crossbar
10-32 x 3/8-in. Phillips pan-head screws
12-24 x 3/4-in. Phillips screws
10-24 x 3/4-in. Phillips screws
Number 2 Phillips screwdriver
Tape measure and level (to ensure shelf brackets are level)
shows the installation of the shelf bracket kit into a two-post telco rack.
Installing the Shelf Bracket Kit into a Telco Rack
2
Cisco MDS 9000 Family Telco and EIA Shelf Bracket
3
4
3 10-32 screws (2x)
4 Crossbar
Cisco MDS 9100 Series Hardware Installation Guide
Table A-1 lists the contents of the
A-5