Cisco MDS 9100 Series Installation Manual page 22

Cisco MDS 9100 Series Ports
All 32 4-Gbps ports and 2 10-Gbps ports can operate at line rate concurrently. In addition, the 10-Gbps
ports can be activated independently at 24- or 32-port configurations.
A 64-port switch can be formed by stacking two Cisco MDS 9134 Switches together using a copper CX4
X2 transceiver.
The Cisco MDS 9134 Switch includes hot-swappable SFP interfaces. All SFP interfaces are 1, 2, and 4
Gbps, with autosensing capabilities. Individual ports can be configured with either short- or
long-wavelength SFP optics for connectivity up to 860 meters and 10 kilometers, respectively. The two
10-Gbps ports support X2 form factor optics, either copper or optical.
For more information about on-demand port licensing, see the Cisco MDS 9000 Family CLI
Configuration Guide and the Cisco MDS 9000 Family Fabric Manager Configuration Guide.
Figure 1-6
Figure 1-6
1
2
1 Console port
2
10/100 Ethernet management port
3 24 default licensed ports
Cisco MDS 9100 Series Hardware Installation Guide
1-8
shows the Cisco MDS 9134 ports.
Cisco MDS 9134 Ports
3
4
5
4 8 on-demand ports
5
2 10-Gbps ports
Chapter 1 Product Overview
OL-16187-01