Effectcon - Yamaha SW60XG Authorized Product Manual

EFFECTCON

The EFFECTCON lets you apply high quality effects to a microphone or line-level input signal while running
under DOS. EFFECTCON also supports volume adjustment of mic., line, CD, and MIDI as well as performing
hardware diagnostic functions.
Startup Procedure
Start EFFECTCON in the SW60XG directory.
[KEY OPERATION] * "_" indicates a space.
CD_\SW60XG + <ENTER>
EFCON + <ENTER>
A list of commands will appear on screen.
Command Names and Functions
QUIET: Suppresses configuration messages displayed when a command is executed.
TYPE: Changes the effect type. Valid values are 0-3.
LINE:
MIC:
MIDI:
REV:
CHO:
[KEY OPERATION]
[KEY OPERATION]
* x = Type number (0 = Dry, 1 = Reverb, 2 = Chorus, 3 = Reverb+Chorus)
Sets the input level from LINE/CD IN.
[KEY OPERATION]
* y = Volume (0-127)
Sets the input level from MIC IN.
[KEY OPERATION]
* y = Volume (0-127)
Sets the input level via MIDI.
[KEY OPERATION]
* y = Volume (0-127)
Sets reverb depth.
[KEY OPERATION]
* y = Volume (0-127)
Sets chorus depth.
[KEY OPERATION]
* y = Volume (0-127)
EFCON_/QUIET + <ENTER>
EFCON_/TYPE:x + <ENTER>
EFCON_/LINE:y + <ENTER>
EFCON_/MIC:y + <ENTER>
EFCON_/MIDI:y + <ENTER>
EFCON_/REV:y + <ENTER>
EFCON_/CHO:y + <ENTER>