System Status; Pc Connect (With Pc Connect Cable Only); Sonar X-Press Menu - Humminbird 777C2 Operation Manual

531474-1_A_777c2_English.qxd 11/3/2005

System Status

Use System Status to view system connections and
to conduct a unit self-test.
The following screens are displayed in turn
when you press the VIEW button when using
System Status:
System Status Self Test Screen
Self Test displays results from the internal diagnostic self test, including unit serial
number, Printed Circuit Board (PCB) serial number, software revision, total hours of
operation and the input voltage.
Accessory Test lists the accessories connected to
the system.
NOTE: The speed accessory will be detected only if the
paddlewheel has moved since your 700 Series™ Fishing
System was powered up.
System Status Accessory Test Screen
Exit System Status by powering your Fishing System off.
PC Connect
Use PC Connect to update the software of the 700 Series™ control head. This feature
requires the use of the PC Connect Cable. Complete instructions are included with
the PC Connect Cable accessory.
NOTE: The PC Connect Cable requires a separate purchase. For more information visit our
website at www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
Exit PC Connect mode by powering the Fishing System off.
8:01 PM Page 32
• Self Test
• Accessory Test.
(with PC Connect Cable only)
25
Sonar X-Press TM Menu
The Sonar X-Press TM Menu provides access to the settings
most frequently-used. Press the MENU key once while in
any of the Sonar Views to access the Sonar X-Press
Menu.
NOTE: Upper Range only appears in Advanced User Mode
when in Sonar, Split Sonar, Big Digits and Circular Flasher
Views.
NOTE: Zoom Level only appears in Sonar Zoom View.
Sonar X-Press TM Menu
26
TM