Installing Sfp Modules And Connecting To Ports - Cisco IE 3000 Getting Started Manual

Cisco IE 3000 Switch Getting Started Guide

Installing SFP Modules and Connecting to Ports

Step 1 Grasp the module on the sides, and insert it
into the switch slot until you feel the
connector snap into place.
Step 2 Insert an appropriate cable into the module
port.
Step 3
Insert the other cable end into the other device.
Caution
OL-16234-01
Follow these steps:
For a list of supported modules, see the release notes on Cisco.com. For detailed
instructions on installing, removing, and connecting to SFP modules, see the
documentation that came with the SFP module.
Removing and installing an SFP module can shorten its useful life. Do not remove
and insert SFP modules more often than is absolutely necessary.
Cisco IE 3000 Switch Getting Started Guide
23