Displaying Sensor Information - Cisco SFS 7000P Hardware Installation Manual

Displaying System Information
================================================================================
================================================================================
product
fan serial-number
--------------------------------------------------------------------------------
1
2
3
4
SFS-7000P#

Displaying Sensor Information

SFS-7000P# show sensor
================================================================================
================================================================================
sensor oper-status oper-code
--------------------------------------------------------------------------------
1/1 up normal
SFS-7000P#
Cisco SFS 7000P Hardware Installation Guide
4-8
Fan Seeprom
pca
serial-number
To display information about the sensors, enter the show sensor command.
Sensor Information
temperature(c)
29
In the Temperature field, the internal system temperature is displayed in Celsius.
The system's maximum external ambient temperature is 30 degrees Celsius (0 –
10,000 feet). Acceptable internal temperature ranges are 30 degrees Celsius above
external ambient, plus 1 degree for every 1,000 feet above sea level.
A warning will appear if the temperature reaches 65 degrees Celsius (at sea level).
The system reboots at an internal temperature of 75 degrees Celsius (at sea level).
Chapter 4 Managing the Cisco SFS 7000P Switch
pca fru
number number
alarm-temp(c) shutdown-temp(c)
65 73
OL-9167-01 Rev. A0