Xantrex PV-100208 Operation And Maintenance Manual page 11

SECTION 3
INSTALLATION AND INITIAL TURN-ON
Cable Entry Area
Array Grounding
NEC 690-41/42 requires the PV array to be earth grounded. The PV-100208 chassis is also bonded
to the PV safety ground terminal block. Refer to the system schematic in the appendix for further
wiring configuration.
DOCUMENT: 151700
Figure 3-1
Figure 3-2
PV-100208 Photovoltaic Inverter
Operation and Maintenance Manual
Copyright 2003, Xantrex Technology Inc.
Lift Here
Cable Entry Area
3-3