Hang hood off upper hood mounting screws with 2 mm gap. Hang off the keyhole
●
●
attachment points on the back of the hood (see Fig.5). Tighten screws.
Attach lower hood mounting screws to fix hood to wall.
●
●
Reattach air flow balancing plate and filters.
●
●
Attach ducting
5
Attach ducting to ducting adapter using aluminium duct tape.
●
●
Attach chimney
6
Bend the tabs on the chimney (A).
●
●
Place chimney around the hood chassis and hang off the bracket (B).
●
●
Extend the upper chimney and attach to the chimney bracket with 10 mm screws (C).
●
●
A
16
16
INSTALLATION INSTRUCTIONS
Fig.5
B
C