Locating The Switch Serial Number - Cisco CATALYST 2960 Hardware Installation Manual

Locating the Switch Serial Number

The switch now behaves like an unconfigured switch. You can configure the switch by using Express
Setup as described in the switch getting started guide that is included with the switch.
You can also configure the switch by using the CLI setup procedure described in
"Configuring the Switch with the CLI-Based Setup Program."
Locating the Switch Serial Number
If you contact Cisco Technical Assistance, you need to know the serial number of your switch. See
Figure 4-1
version command to get the serial number.
Figure 4-1 Serial Number Location on the Catalyst 2960-24PC-L, 2960-24LT-L, 2960-48PST-L, 2960-24TC-S,
2960-48TC-S, 2960-24TT-L, 2960-48TT-S, 2960-48TT-L, 2960G-24TC-L, 2960-24PC-S, 2960-24LC-S,
2960-48PST-S, and 2960G-48TC-L Switches
Cisco 11-character label
Figure 4-2 Serial Number Location on the Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switches
SN: XXXNNNNXXXX
Catalyst 2960 Switch Hardware Installation Guide
4-6
through Figure 4-3
SN: XXXNNNNXXXX
to locate the serial number on your switch. You can also use the show
Chapter 4 Troubleshooting
Appendix C,
OL-7075-09