General Description; Scope Of Delivery; Function Description; Technical Specifi Cations - Parkside PDOS 200 C2 Translation Of The Original Instructions

General description

The illustrations can be found
on the front and rear fold-out
pages.

Scope of delivery

Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
• Appliance
• 2 x spark protection
• mounting material for fi xing the spark
protection to the spark protection holder
- 2 x holder for spark protection
- 2 fi xing screws, 2 spring washers,
2 washers, 2 nuts
• mounting material for fi xing the spark
protection to the device
- 2 adjusting screws incl. washers and
spring washers, 2 nuts
• 2 workpiece supports
• mounting material for fi xing the work-
piece supports to the device
- 2 star washers, 2 screws, 2 washers,
2 toothed washers
• Instruction Manual

Function description

The double bench grinder is a combined
device fi tted with two grinding discs with
different grain size for coarse and fi ne
grinding.
The device is provided with a spark protec-
tion and protective hoods for the protection
of the user.
For the function of the operating parts,
please refer to the descriptions below.
GB

Summary

1 Spark protection
2 Spark protection holder
3 Adjusting screw for spark
protection
4 Fixing screw for spark protection
5 Protective hood grinding disc
6 Motor housing
7 Fixing screws for grinding disc
cover
8 Grinding disc cover
9 Power cable
10 Grinding disc
11 Workpiece support
12 Star grip nut to mount/adjust the
workpiece support
13 Drillholes for table mounting
14 On/off switch
14a On switch
14b Off switch
15 Grinder spindle
Technical specifi cations
Double Bench Grinder .. PDOS 200 C2
Nominal input voltage ......230 V~, 50 Hz
Power consumption ..200 W (S2 30 min)*
No load power
consumption P .....................145 W (S1)
0
Safety class .......................................... I
Mechanical rating ............................IPX0
Measurement idling speed n
Velocity v .......................... max. 23 m/s
0
Grinding disc**
Outer diameter ................... Ø 150 mm
Bore hole .......................... Ø 12.7 mm
Thickness .................................20 mm
Hardness ....................................... P5
Grain size ................................ 36/80
Speed n ....................max. 4500 rpm
0
Working speed ................ max. 35 m/s
IE NI CY
... 2980 min
0
-1
-1
5