Removal And Replacement Of Spray Tubes; Removal And Replacement Of Transformer - Hoshizaki KM-280MAH-E Service Manual

M. Removal and Replacement of Spray Tubes
1) Turn off the power supply. Unplug the icemaker.
2) Remove the front panel and the insulation panel.
3) Remove the rubber hoses from the spray tubes (water supply pipe).
4) Release the clamps and disconnect the rubber hoses.
5) Remove the spray tubes by squeezing the side tabs.
6) Install the new spray tubes, and replace the removed parts in the reverse order of which
they were removed.
7) Replace the panels in their correct positions.
8) Plug in the icemaker. Turn on the power supply.
N. Removal and Replacement of Transformer
1) Turn off the power supply. Unplug the icemaker.
2) Remove the panels.
3) Remove the closed end connectors from the transformer leads.
4) Remove the transformer cover.
5) Remove the transformer.
6) Install the new transformer.
7) Replace the transformer cover.
8) Install new closed end connectors.
9) Refit the panels.
10) Plug in the icemaker. Turn on the power supply.
58