Installing A Fan Module - Cisco 5000 Series Hardware Installation Manual

Chapter 3 Installing the Cisco Nexus 5500 Platform or 5000 Series Switch
This section includes the following topics:
•
•

Installing a Fan Module

To install a fan module, follow these steps:
Hold the fan module with the LED at the bottom.
Step 1
Place the fan module into the front chassis cavity so it rests on the chassis, and then push the fan module
Step 2
into the chassis as far as it can go and the captive screw makes contact with the chassis, and tighten the
captive screw. See
Figure 3-17
Figure 3-18
OL-15902-01
S e n d c o m m e n t s t o n 5 k d o c s @ c i s c o . c o m
Installing a Fan Module, page 3-29
Removing a Fan Module, page 3-30
Fan Module for the Cisco Nexus 5548 Switch
Fan Module for the Cisco Nexus 5020 switch
Removing and Installing Components
Cisco Nexus 5000 Series Hardware Installation Guide
3-29