Cisco 5000 Series Hardware Installation Manual page 48

Cisco Nexus 5020 Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Supported SFP Transceivers
The Cisco Nexus 5020 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
This section includes the following sections:
•
•
•
SFP+ Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a
bidirectional device with a transmitter and receiver in the same physical package.
a 20-pin connector on the electrical interface and duplex LC connector on the optical interface.The Cisco
Nexus 5020 switch supports the SFP-10G-SR transceiver.
Model
SFP-10G-SR
Figure 2-18
Figure 2-18
SFP+ Copper Cables
Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. See
cables come in the following lengths:
•
•
Cisco Nexus 5000 Series Hardware Installation Guide
2-16
SFP+ Transceivers, page 2-16
SFP+ Copper Cables, page 2-16
SFP Fiber Channel Transceivers, page 2-17
Table 2-4
shows the SFP-10G-SR transceiver.
SFP+ 10-Gigabit Ethernet Transceiver Module
1m, 30AWG
3m, 28-30 AWG
Chapter 2
SFP+ Transceivers
Description
10-Gigabit Ethernet-short range SFP+ module
Cisco Nexus 5000 Series Overview
SeeTable 2-4 . It has
Table 2-5. The
OL-15902-01