Port Level Leds; Supported Sfp Transceivers; Sfp+ Transceivers; Sfp+ Copper Cables - Cisco 5000 Series Hardware Installation Manual

Chapter 2 Cisco Nexus 5000 Series Overview
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Table 2-9
LED
PSU Status
Indicators
GEM
Health Indicator

Port Level LEDs

There are 20 to 26 port activity LEds on the switch depending on whether the GEM is a Fibre Channel
or 10-Gigabit Ethernet module.
Link State
Link Down
POST failed on port
Administrative disabled AMBER_ON
Link Up,
port in STP forwarding
state

Supported SFP Transceivers

The Cisco Nexus 5010 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
This section includes the following topics:
•
•
•
OL-15902-01
LEDs for the Cisco Nexus 5010 Switch (continued)
Location
Power supply
(front)
Back of chassis
Table 2-10
LED State
OFF
AMBER blinking yellow
GREEN_ON
SFP+ Transceivers, page 2-32
SFP+ Copper Cables, page 2-32
SFP Fiber Channel Transceivers, page 2-32
Function Color
PSU Health Green
(multi color)
Amber
An indicator
Green
to show
there is a
fault with
Amber
any one of
the GEMs
Table 2-10 describes the behavior of the port LEDs.
Port Level LEDs
Notes
—
—
Depending on the product you look at, the
LED could be off, or solid amber
Blinks based on network activity
Cisco Nexus 5000 Series Hardware Installation Guide
Cisco Nexus 5010 Switch
Status Description
OFF No AC power to power supply
Solid On Power supply on and OK
Power supply failures, overvoltage,
Solid On
overcurrent, overtemperature
Blinking AC present, 3.3 VSB on,
PSU is off
OFF Operating normally
GEM is operating
On
normally
A fault has occurred on
Solid on
the GEM.
2-31