Start Up - Hoshizaki KM-150BAF Instruction Manual

6. START UP

6. START UP 6. START UP 6. START UP 6. START UP
1. All parts are factory-adjusted. Improper adjustments may result in failure.
2. If the unit is turned off, wait for at least 3 minutes before restarting the
icemaker to prevent damage to the Compressor.
1) Open the Water Supply Line Shut-off Valve.
2) Remove the Front Panel.
3) Move the Control Switch, on the Control Box, to the "ICE" position.
4) Run the icemaker for about 10 minutes, and move the switch to the "OFF" position.
5) Open the Door.
6) Remove the Cube Guide and the Overflow Pipe to drain the Water Tank. See Fig. 2.
7) Replace the Overflow Pipe and the Cube Guide in their correct positions.
8) Clean the Storage Bin.
9) Move the switch to the "ICE" position, and start the automatic icemaking process.
10) Replace the Front Panel in its correct position.
11) Shut the Door.
CAUTION CAUTION
CAUTION CAUTION CAUTION
Fig. 2 Fig. 2
Fig. 2 Fig. 2 Fig. 2
13