Marantz NR1607 Service Manual page 66

5. SPK PCB
Proceeding : TOP COVER → COVER
(1) Remove the screws.
Shooting direction: A
(2) Remove the screws. Remove the CORD HOLDER and connectors. Remove the HOLDER.
CP4800
CP4607
CP4002
CP4000
→ HDMI PCB → SPK PCB
x4
CP4802 CP4803
CP4001
x1
x5
HOLDER
CORD HOLDER x4
6. TRANS
Proceeding : TOP COVER → COVER
(1) Remove the CORD HOLDERs and connector wires.
CP4607
(2) Remove the screws.
x4
NOTE : It will separate and TRANS will fall from SET, if screws is removed.
7. SMPS PCB
Proceeding : TOP COVER → SMPS PCB
See "EXPLODED VIEW" for instructions on removing the SMPS PCB.
8. REG PCB
Proceeding : TOP COVER → REG PCB
See "EXPLODED VIEW" for instructions on removing the REG PCB.
9. AV PCB
Proceeding : TOP COVER → COVER
See "EXPLODED VIEW" for instructions on removing the AV PCB.
66
→ HDMI PCB → TRANS
from CP4401
CP4142
CORD HOLDER x5
View from the bottom
→ HDMI PCB → AV PCB