Ryobi RB-264S Owner's Operating Manual

Petrol blower

Advertisement

Quick Links

Engine type................................................................................ 4-stroke, air-cooled
Engine displacement......................................................................................26.5cc
Engine max. speed..................................................................................11000min
Engine idle speed........................................................................... 3200+/-300min
Air speed........................................................................................200KM/H, 55m/s
Air volume....................................................................................430CFM, 540m
Fuel tank capacity........................................................................................... 280ml
Fuel type......................................................................................... Unleaded petrol
Engine lubricant oil type....................................................................... SAE 10W-30
Starting system....................................................................................Recoil starter
Spark plug type............................................................................................ CMR5H
Sound pressure level.............................................................L
Sound power level.............................................................. L
Vibration level........................................................................... 14.4m/s
Weight.............................................................................................................. 4.2kg
THANK YOU FOR BUYING A RYOBI
Your new petrol blower has been engineered and manufactured to Ryobi's high
standard of dependability, ease of operation and operator safety. Properly cared
for, it will give you years of rugged, trouble free performance. If you use your
petrol blower properly and only for what it is intended, you will enjoy years of
safe, reliable service.
CAUTION: Carefully read through this entire owner's
KEEP THIS MANUAL FOR FUTURE REFERENCE
OWNER'S OPERATING MANUAL
PETROL BLOWER
MODEL RB-264S
SPECIFICATIONS
PETROL BLOWER
manual, paying close attention to the general
safety rules and rules for safe operation,
before using.
1
90dB(A),k=3dB(A)
pA
105dB(A),k=3dB(A)
WA
, K=1.5m/s
2
-1
-1
/h
3
2

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi RB-264S

  • Page 1 THANK YOU FOR BUYING A RYOBI PETROL BLOWER Your new petrol blower has been engineered and manufactured to Ryobi’s high standard of dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance. If you use your petrol blower properly and only for what it is intended, you will enjoy years of safe, reliable service.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS NOTICE Do not use E15 or E85 fuel in this product. It is a violation of federal law and will damage the unit and void your warranty. Only use unleaded gasoline containing up to 10% ethanol. The purpose of safety rules is to attract your WARNING attention to possible dangers.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS Keep firm footing and balance. Do not overreach. may damage the equipment, create unsafe Overreaching can result in loss of balance or conditions, injury to user and/or void your warranty. exposure to hot surfaces. Always hold the blower in your right hand during Before storing, allow the engine to cool.
  • Page 4: Residual Risks

    IMPORTANT SAFETY INSTRUCTIONS Store fuel in a cool, well-ventilated area, safely RESIDUAL RISKS away from spark and/or flame-producing Even when the unit is used as prescribed it is not equipment. possible to eliminate all residual risk factors. The following hazards may arise in connection with the Store fuel in containers specifically designed for unit’s construction and design: this purpose.
  • Page 5 DESCRIPTION 12 10 1. Fuel tank cap 7. Ignition switch 2. Primer button 8. Blower tubes 3. Choke lever 9. Muffler 4. Air filter 10. Spark plug 5. Handle 11. Oil tank cap 6. Throttle trigger 12. Starter handle UNPACKING CAUTION.
  • Page 6: Assembling The Blower Tubes

    ASSEMBLY PACKING CONTENTS (FIG.1) • Blower assembly. • Upper blower tube. • Lower blower tube. • Screwdriver (1). • Wrench for spark plug (1). • Empty bottle. • Operator’s manual. WARNING. To prevent an accidental start that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
  • Page 7: Operation

    OPERATION WARNING. Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING. Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection.
  • Page 8: Starting And Stopping

    OPERATION Note: Visually inspect to see if fuel level is low. If Note: The choke lever is only used when starting a fuel is low, refill with unleaded fuel carefully without cold engine. Never move the choke lever to the overfilling and tighten the fuel tank cap right position once the engine has been turned over immediately.
  • Page 9: Maintenance

    OPERATION ENGAGE AIR BLOWING including areas such as gutters, screens, patios, Air blowing will be engaged if the operator presses grills, porches, and gardens. the throttle trigger to increase the engine speed. Operate blower at the lowest possible throttle TIPS FOR WORKING speed to do the job.
  • Page 10: Engine Oil Replacement

    MAINTENANCE ENGINE OIL REPLACEMENT WARNING. Old engine oil is considered special waste and has to be disposed according to your local environment protection regulation. Do not pour the oil to garbage can, sewer, soil etc. 1. The engine oil replacement is easier if engine is warm (NOT HOT!).
  • Page 11: Troubleshooting

    MAINTENANCE Clean the electrodes (metal tip) to refresh the STORAGE surfaces. 1. Store the machine out of reach from children and other unauthorized persons in a well Check the spark plug gap. It should be ventilated, dry and frost-free environment. between 0.7-0.8 mm.
  • Page 12 SYMBOLS Indicates danger, warning or caution. It means attention!!! Safety Alert Symbol Your safety is involved. Read Your Operator's Your manual contains special messages to bring attention Manual to potential safety concerns as well as operating and servicing information. Please read all the information carefully to ensure satisfaction and safe use.
  • Page 13 NOTES...
  • Page 14 NOTES...
  • Page 15 NOTES...

Table of Contents