Cisco 1800 Regulatory Compliance And Safety Information Manual page 9

•
•
•
•
•
FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules. On the bottom of the chassis is a label that
contains, among other information, the FCC registration number and ringer equivalence number (REN)
for this equipment. If requested, this information must be provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operation, or procedures that
could affect the operation of this equipment. If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
Normally, this equipment will be used in conjunction with FCC registered equipment that limits the
Encoded Analog Content that provides the required Billing Protection. If the connected equipment is not
of this type, an affidavit must be supplied to the telephone company where the network connection is to
be made. The affidavit is to be notarized, and is to be filed at least ten days before the initial connection.
The facility interface and service order codes are shown in
Table 1
Interface Type
ADSL
SHDSL
BRI - S/T
BRI-U
T1 data
T1 voice
OL-10256-02
Mexico—TIA-968-A accepted
New Zealand—PTC-217, PTC-220, PTC 270/272, CTR3, ACA 016, ACIF S016
Singapore—IDA TS ADSL1 Issue 1, IDA TS ADSL 2, IDA TS HDSL, IDA TS ISDN 1 Issue 1 1999,
IDA TS ISDN 3 Issue 1 1999, IDA TS PSTN 1 Issue 4, IDA TS PSTN 1 Issue 4, IDA TS PSTN 1 Issue 4
South Africa—DPTE-TE-001, TIA-968-A accepted
Taiwan—PSTN01, TIA-968-A accepted
Cisco 1800 Fixed Configuration Routers Facility Interface and Service Order Codes
Facility Interface Code
(FIC)
Metallic
Metallic
02IS5
02IS5
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN,
04DU9-1ZN
Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed)
Table 1.
Service Order Code
(SOC) Jack Type (USOC)
— RJ-11C
— RJ-11C
RJ-14C
6.0N RJ-49C via NT1
6.0N RJ-49
6.0N RJ-48C
6.0Y RJ-48C
Telecommunications
9