Cisco 1800 Regulatory Compliance And Safety Information Manual page 2

Safety
•
•
This equipment will be inoperable when mains power fails. Statement 198
Warning
High leakage current—permanent earth connection essential before making Telecommunication
Warning
Network Connection. Statement 343
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Warning Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface. Statement 1037
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote
Warning
risk of electric shock from lightning. Statement 1038
For connections outside the building where the equipment is installed, the following ports must be
Warning
connected through an approved network termination unit with integral circuit protection.
10/100/1000 Ethernet Statement 1044
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
Warning
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only
through the use of a special tool, lock and key or other means of security. Statement 1072
Warning No user-serviceable parts inside. Do not open. Statement 1073
Agency Approvals and Standards
This section lists the following agency approvals and standards for safety:
•
•
•
Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed)
2
Operating Conditions for Australia and the European Community
Operating Conditions for the United Kingdom
CSA Certified to UL 60950 and CSA 22.2 No. 60950
ACA to AS/NZS 60950
CB Certificate/Test Report to IEC 60950-1, edition 1 (2001) with all country deviations, as well as
to EN 60950-1
OL-10256-02