Table of Contents
Advertisement
PCB Design
2
PCB Design
This chapter presents the layout design of the PCB thereby describing the physical and mechanical
characteristics of the EVM. The list of components used on the module is also included in this section.
2.1
PCB Layout
The AMC7823 EVM was designed using the double-wide modular EVM form factor developed by Texas
Instruments. This EVM form factor allows direct evaluation of the AMC7823 operating characteristics and
speeds up software development and other prototyping needs.
The AMC7823 EVM board is constructed on a four-layer printed circuit board using a copper-clad FR-4
laminate material. The printed circuit board has dimensions of 93,9800 mm (3.7000 inch) × 81,2800 mm
(3.200 inch), and the board thickness is 1,5748 mm (0.0620 inch).
individual artwork layers.
4
AMC7823 Evaluation Module
Figure 2. Top Silkscreen
Figure 2
through
Figure 8
SLAU171 – November 2005
www.ti.com
show the
Advertisement
Table of Contents
