www.ti.com
Reference
Jumper Setting
W10
W11
Legend:
indicates the corresponding pins that are shorted or closed.
3.5
Schematic
SLAU171 – November 2005
Table 3. Jumper Settings and Functions (continued)
The EEPROM, U4, address is set to 010b. This is only used with a PC graphical user interface
application program. See section 3.3.
The EEPROM, U4, address is set to 000b. This is only used with a PC graphical user interface
application program. See section 3.3.
Digital ground is not connected to analog ground.
Digital ground is connected to analog ground.
Function
AMC7823 Evaluation Module
EVM Operation
13