Mount The Drive - IBM Ultrastar 36LP Installation And Reference Manual

IBM storage products

Mount the drive

Note: Drive bays and other enclosures vary in size and orientation from system to system. They may be
oriented vertically, horizontally, upside down, or sideways. The IBM Ultrastar can be mounted with any of
its six surfaces facing down.
Ÿ
Mount the drive as instructed by your computer system manual using four 6-32 UNC screws.
Ÿ
The drive should be mounted securely enough to prevent excessive motion or vibration.
Ÿ
Ensure that the drive has sufficient air flow.
IBM Technology Group Support Center
(6X) 6-32 UNC
(6X) 6.35 ±0.2
RIGHT
Recommended torque 0.6 - 1.0 Nm
Max allowable penetration of noted screw
to be 4.5 mm.
Max allowable penetration of noted screw
to be 4.0 mm.
Thickness of bracket
Page 11
(4X) 6-32 UNC
(2X) 95.25 ±0.2
REAR
Screw 6-32 UNC
07N5612IG10