Cadillac XT6 2023 Owner's Manual page 404

service description. See the
Tire Size illustration in
this section.
(2) TPC Spec (Tire
Performance Criteria
Specification) Original
:
equipment tires designed
to GM's specific tire
performance criteria have a
TPC specification code
molded onto the sidewall.
GM's TPC specifications
meet or exceed all federal
safety guidelines.
(3) DOT (Department of
Transportation) The
:
Department of
Transportation (DOT) code
indicates that the tire is in
compliance with the U.S.
Department of
Transportation Motor
Vehicle Safety Standards.
DOT Tire Date of
Manufacture The last
:
four digits of the TIN
indicate the tire
manufactured date. The
first two digits represent
the week and the last two
digits, the year. For
example, the third week of
the year 2020 would have
a 4-digit DOT date of 0320.
Week 01 is the first full
week (Sunday through
Saturday) of each year.
(4) Tire Identification
Number (TIN) The letters
:
and numbers following the
DOT (Department of
Transportation) code are
the Tire Identification
Number (TIN). The TIN
shows the manufacturer
and plant code, tire size,
and date the tire was
manufactured. The TIN is
molded onto both sides of
Vehicle Care
the tire, although only one
side may have the date of
manufacture.
(5) Tire Ply Material
type of cord and number of
plies in the sidewall and
under the tread.
(6) Uniform Tire Quality
Grading (UTQG) Tire
:
manufacturers are required
to grade tires based on
three performance factors:
tread wear, traction, and
temperature resistance.
For more information see
Uniform Tire Quality
Grading 0 421.
(7) Maximum Cold
Inflation Load Limit
Maximum load that can be
carried and the maximum
pressure needed to
support that load.
403
The
:
: