Cadillac XT6 2023 Owner's Manual page 336

System pedestrian icons,
beeps, and (if equipped) Safety
Alert Seat pulses can be set to
Off through vehicle settings
by turning off the Front
Pedestrian Braking system. To
view available settings from
the infotainment screen, touch
Settings > Vehicle > Collision/
Detection Systems > Front
Pedestrian Detection.
Warning
The Night Vision system
does not automatically brake
the vehicle. It does not
provide alerts unless it
detects a pedestrian or
large animal. The system
may not detect pedestrians,
including children, or animals:
If they are less than 25 m
(82 ft) away.
If they are not directly
ahead in the sensor
coverage area, fully visible,
standing upright, or part
of a group.
(Continued)
Warning (Continued)
If the person or animal is
moving too quickly
through the field of view,
such as a bicyclist.
If the pedestrian is
wearing certain types of
clothing.
If headlamps are off,
except when parked.
If the outside temperature
is higher than 30 °C
(86 °F).
Due to poor visibility,
including in heavy fog, rain,
or snow.
If the sensor is blocked by
dirt, snow, rain, or ice.
Be ready to take action and
apply the brakes. For more
information, see Defensive
Driving 0 240. Keep the
Night Vision sensor clean
and in good repair.
Driving and Operating
Pedestrian detection may not
be available in high outside
temperatures. An amber icon,
, displays. The system does
not need service.
In rain, snow, or fog the image
may not be clear and the
direction of the road ahead
may not be seen. In more
severe weather conditions,
the image may be unclear and
unusable. The system does
not need service.
Keep the system sensor clean
by activating the rear window
washer when it is dark enough
for the system to operate.
If the Night Vision image still
looks blurry, use a soft wet
cloth to gently clean the
sensor camera lens and dry
thoroughly. The sensor is
behind the lower front grille
below the driver side
headlamp.
The camera must also be
aligned to work correctly.
If the camera needs
335