Cadillac XT6 2023 Owner's Manual page 156

with Step 3 under
Programming the Universal
Remote System to complete.
Universal Remote
System Operation
Using the Universal
Remote System
Press and hold the
appropriate Universal Remote
system button for at least
one-half second. The indicator
light will come on while the
signal is being transmitted.
Erasing Universal Remote
System Buttons
Erase all programmed buttons
when vehicle ownership is
terminated.
To erase:
1. Press and hold the two
outside buttons until the
indicator light begins to
flash. This should take
about 10 seconds.
2. Release both buttons.
Reprogramming a Single
Universal Remote System
Button
To reprogram any of the
system buttons:
1. Press and hold any one of
the buttons. Do not
release the button.
2. The indicator light will
begin to flash after
20 seconds. Without
releasing the button,
proceed with Step 1 under
Programming the
Universal Remote System.
Instruments and Controls 155