Windows Nt 4.0 Installation; Backup Software; Backup; Encryption - IBM Travelstar 10E Installation And Operation Manual

Windows NT 4.0 installation

Note: Your notebook computer must be turned off before
connecting the IBM Travelstar E.
1. Connect the PC Card cable to your IBM Travelstar E.
2. Connect the IBM Travelstar E cable to your notebook
PCMCIA connector.
3. Turn your notebook on and follow the instructions on the
screen.
4. At the Welcome Menu, you will have the opportunity to install
a number of different programs. Click on the items you want
to install and follow the Install Wizard's instructions.
5. To exit the Menu, click on "Quit and Return to Desktop".

Backup software

Backup

Included with your IBM Travelstar E are back-up and mirroring
utilities. These utilities can be used to back up files on your
internal drive to your IBM Travelstar E.

Encryption

Encryption is included with your backup utility. Backing up your
data using the encryption feature will protect your data because
only you will know the encryption code.

Scheduler

Scheduler is a part of the IBM Travelstar E software that
provides scheduled data backups. Scheduler can be set up to do
programmed backups at regular intervals for selected files or for
the notebook's primary hard drive.

Software technical support

For technical support on the Travelstar software refer to the
support number in the help section. These software programs
are not supported by IBM.
Installation and operation guide
4