Table of Contents
Advertisement
en Childproof lock
To reduce the standby consumption of your appliance,
you can hide the clock.
14 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
14.1 Activating the childproof lock
Requirement: The appliance is switched off.
▶
Press and hold
for approximately 4 seconds.
a The control panel is locked.
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
1
Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement: The appliance is switched off.
26
Basic setting
Signal duration
Button tone
Display brightness
Time indicator
Interior lighting
Water hardness
Factory setting
Demo mode
appears on the display.
a
Note: If you have set a timer duration
to count down. While the childproof lock is active, the
timer duration cannot be changed.
You can end the signal tones by touching any field.
14.2 Deactivating the childproof lock
▶
Press and hold
a The control panel is unlocked.
Selection
= short = 10 seconds
= medium = 30 seconds
= long = 2 minutes
= off
1
= on
= low
1
= medium
= high
= off
1
= on
= off
1
= on
= softened
= soft
= moderate
= hard
1
= very hard
1
= off
= on
1
= off
= on
1.
Press and hold
a The first basic setting is shown on the display.
2.
Use the rotary selector to change the basic setting.
, this continues
for approximately 4 seconds.
Description
Set the signal duration for
1
after a cooking time
elapses or the timer
reaches zero.
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
Switch the interior lighting
on or off.
Set the water hardness
→ Page 13.
Reset the changed settings
to the factory settings.
Switch demo mode on or
off.
Note: Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
for a few seconds.
Advertisement
Table of Contents
