Auto Color - Samsung PS-42D4S Service Manual

Alignment and Adjustments

※ Auto Color

-. Must be executed in Component/PC before adjusting White Balance.
1) Input Auto Color Pattern with MSPG-925LTH(model:#6, pattern:#21).
2) Press "POWER OFF-INFO-MENU-MUTE-POWER ON" to enter the factory mode.
3) Select "01.Picture Improvement" ¡æ "01.White Balance" -> "15.Auto Color"
and Select "Off" -> "On"
4) It takes a few seconds to execute it.
(b) Component
1) Execute Auto Color in the method described above.
2) Input Toshiba Pattern at 720p resolution (model:#6, pattern:#16).
3) Select "01.Picture Improvement" -> "01.White Balance".
4) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.
5) Change input to Toshiba Pattern at 1080i resolution (model:#5, pattern:#16).
6) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.
(c) PC
1) Execute Auto Color in the method described above.
2) Input Toshiba Pattern at 800 x 600 (model:#16, pattern:#16).
3) Select "01.Picture Improvement" -> "01.White Balance".
4) Adjust White Balance by selecting and adjusting Items 01 - 08 as performed in DVI mode.
(d) Video
The video signal uses the video port when there is no other input signal.
However, signal uses the graphic port in PIP mode, which includes other input signals (PC, DVI, Component, etc.), Video adjust-
ment should be performed with Video port and Graphic port separately.
1) Input Toshiba Pattern to Video Input (model:#2, pattern:#16).
2) Select "04.Option-1" -> "10.Video Port."
3) Set "10. Video Port" equal to "Video".
4) At Main SVC Menu, select "01.Picture Improvement" -> "01.White Balance."
5) Adjust Items 01 - 08 as performed in DVI mode.
6) Return to Main SVC menu and select "04.Option-1" -> "10.Video Port."
7) Set "10. Video Port" equal to "Graphic".
Samsung Electronics 2-3