Leupold RX-1400i TBR/W Complete Operating Instructions page 30

To activate the appropriate ballistics
group, TBR must be activated and you
must choose between BAS, HOLD, MIL, or
MOA . Once this has been done, pressing
the MODE button will allow you to select
the appropriate ballistics group . Load
will be shown in the upper display, and
the current ballistics group will be shown
in the lower display . Press and release
POWER to scroll through the available ballistics groups . Press
MODE to move on to WIND output selection .
When activated, the rangefinder will first display the distance to
the target then show the appropriate wind hold for the selected
output . If the selected output is TRIG, LOS, or BOW, wind cannot
be activated .
SELECTED OUTPUT
BAS
HOLD (YD/M)
MIL
MOA
SELECTED OUTPUT
MOA
IN/IN
MIL
MOA
28