28
FEATURES FOR RECORDING
EN
Iris Lock
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
●
When the distance to the subject changes (so
its size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
●
When shooting on a reflective natural
background such as at the beach or when
skiing.
●
When shooting objects under a spotlight.
●
When zooming.
1
Perform steps 1 - 6 in "Exposure Control"
(
pg. 27)
2
Adjust zoom so that the subject fills the
LCD monitor or the viewfinder, then press and
hold SET or
for over 2 seconds. The " "
2
indication appears.
3
Press SET or
. The iris is locked.
2
4
Press MENU.
Backlight Compensation
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1
Set the Power Switch to
"REC".
2
M
Set the recording mode to
"
".
pg. 18)
(
3
Press
so that the
Backlight Compensation
indicator "
" appears.
To cancel Backlight Compensation
Press
twice so that the "
disappears.
NOTE:
Using Backlight Compensation may cause the
light around the subject to become too bright and
the subject to become white.
Selection of a spot metering area enables
more precise exposure compensation.
1
2
3
Control indicator "
●
4
●
●
To lock the iris
After step 3, press and hold SET over 2
seconds. The "
iris is locked.
To cancel Spot Exposure Control
Press
disappears.
NOTES:
●
●
SET
" indicator
Spot Exposure Control
Set the Power Switch to "REC".
Set the recording mode to "
Press
twice so that the Spot Exposure
" appears.
A spot metering area frame appears at the
center of the LCD monitor/viewfinder.
Press SET.
Spot Exposure Control is engaged.
Exposure is adjusted to make the brightness of
the selected area most appropriate.
" indication appears and the
once so that the "
Depending on the shooting location and
condition, optimum result may not be attained.
"STROBE" in "EFFECT" cannot be used with
Spot Exposure Control.
M
".
pg. 18)
(
" indicator