Using The Map - Garmin RV 795 Owner's Manual

Avoiding an Area
1 Select > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper-left corner of the area to avoid, and select Next.
5 Select the lower-right corner of the area to avoid, and select Next.
The selected area is shaded on the map.
6 Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1 Select > Navigation > Custom Avoidances.
2 Select an avoidance.
3 Select > Disable.
Deleting Custom Avoidances
1 Select > Navigation > Custom Avoidances >
2 Select an option:
• To delete all custom avoidances, select Select All > Delete.
• To delete one custom avoidance, select the avoidance, and select Delete.
You can use the map to navigate a route
surroundings when no route is active.
1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To add or remove map layers such as topographic and BirdsEye imagery, select
• To zoom in or out, select
• To switch between North Up, 2-D, and 3-D views, select
• To open the route planner, select
• To start a route, select a location on the map, and select Go!

Using the Map

.
Using the Map
(Your Route on the Map,
or .
(Route Planner, page 36).
page 19) or to view a map of your
.
(Starting a Route by Using the Map,
.
page 18).
23