Using The Charging/Communication Cables - Honeywell Dolphin 99EXL0 I Series User Manual

Using the Charging/Communication Cables

Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC
and 3 amps with the device.
Warning! The Charging/Communication cables (i.e., 99EX-DEX, 99EX-RS232, 99EX-USB, and 99EX-
USBH) are not designed for use in hazardous locations.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Plug
Adapter
Power
Cable
COMM Cable
Battery Error Notification
See Battery Error Notification
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied. Do NOT press any keys or interrupt the boot
process. When the boot process is complete, the Home screen appears, and the terminal is ready for
use.
Dolphin 99EX
Cable Cup
Host Device
on page 2-3.
Plug
Adapter
Power
Cable
USB Connector
Or
RS232 Connector
Or
RS232, DEX A/V Connector
Dolphin 99EX
Charging
Cup
Client Device
2 - 5