Panasonic SB-WA730 Service Manual page 12

SB-WA730PP
Step 5: Pull out the entire Power Amp Unit.
6.2.4. Disassembly of the Rear Panel and
Fan Unit
Follow Step (1) to Step (5) described in section 6.2.3.
Step 1 & 2: Remove 7 screws from the rear panel.
Step 3: Disconnect the connector (CN507) to detach the rear
panel.
Step 4: Remove 4 screws from the rear panel.
Step 5: Lay the rear panel and remove the Fan Unit as arrow
shown.
6.2.5. Disassembly and checking of the
AC Inlet P.C.B., Power P.C.B. and
Transformer P.C.B.
Follow Step (1) to Step (5) described in section 6.2.3.
Follow Step (1) to Step (5) described in section 6.2.4.
Step 1: Remove the P.C.B. support by pushing the claws as
12