7. TCP/IP LPR Port Printing
Installation
Basic TCP/IP Installation Overview
When installing your Wireless Print Server in a TCP/IP
environment, IP addresses are essential as a basic means of
communications. It is therefore necessary to first assign an IP
address to your Wireless Print Server unit. After assigning an IP
address, the Wireless Print Server can be configured accordingly.
Assigning an IP Address
The first step to install a Wireless Print Server on a TCP/IP network
is to assign the Wireless Print Server an IP address and other
related TCP/IP settings before the Wireless Print Server can
function. You can select the following two methods to specify an IP
address the Wireless Print Server. Each method will be detailed in
the following section.
1. Use the Network Print Monitor utility.
2. Manually specify (using DOS commands or UNIX
text-mode commands. This applies to Windows NT/2000
and UNIX systems).
Note: The Network Print Monitor can only search for the Wireless
Print Server(s) over the same network segment the Windows
NT/2000/UNIX computer is located. You would like to install
a Wireless Print Server on a different network segment.
Troubleshooting
9 - 1