Configuration From Web Browser; Overview; Using Embedded Web Server; Status Menu - Hawking WA739P User Manual

Wireless access point with 3-port wireless print server or 3-port wireless print server
Hide thumbs Also See for WA739P:
Table of Contents

Advertisement

Network Print Monitor
5. Configuration from Web
Browser

Overview

The Wireless Print Server contains an embedded web server that
can be accessed through a supported web browser on a LAN, for
example, IE 4.0, Netscape 4.0 or above is recommended.
The embedded web server provides access to configuration and
management pages for the Wireless Print Server and the
connected peripheral device.

Using Embedded Web Server

Before you can use the embedded web server, the Wireless Print
Server must be configured with an IP address. There are many
ways to configure the Wireless Print Server's IP address. For
example, the Windows-based of PSAdmin utility can easily set an
IP address with the Wireless Print Server, please see the
Properties – TCP/IP options of chapter 3.
After an IP address is established on the Wireless Print Server,
perform the following step:

Status Menu

Once you have finished the IP address configuration with Wireless
Print Server. You should be use web browser to view and
management the Wireless Print Server. The status menu of the
Wireless Print Server helps administrator control the Wireless Print
Server's System, Printer, NetWare, TCP/IP, SNMP and AppleTalk
of status for the time being.
6 - 1

Advertisement

Table of Contents
loading

Table of Contents