Cisco Linksys SPA3102 User Manual page 34

Voice Gateway with Router
PPPoE Service Name (optional). Enter the service name provided by your ISP.
Optional Settings
HostName. Enter the host name, if provided by your ISP.
Domain. Enter the domain name, if provided by your ISP.
Primary DNS. Enter the IP address of the primary DNS server.
Secondary DNS (optional). Enter the IP address of the secondary DNS server.
MAC Clone Settings
Enable MAC Clone Service. Select whether you want to clone a MAC address onto the Voice Gateway, yes or
no. The default is no.
Cloned MAC Address. Enter the MAC address you want to clone.
Remote Management
Enable WAN Web Server. This feature lets you enable or disable access to the Web-based Utility from the WAN
side. Select yes or no from the drop-down menu. The default is no.
WAN Web Server Port. Enter the port number used to access the Utility from the WAN side. The default is 80.
QOS Settings
QOS QDisc. QoS prioritizes voice communications when different types of traffic are competing for bandwidth.
Select the method you want to use: NONE, CBQ, or TBF. The default is NONE.
26
mac address: the unique address that a
manufacturer assigns to each networking
device.
Chapter 6: Using the Web-based Utility
The Router Tab