Disclaimers; Unpacking - Simpson SSTP71007 Use And Care Manual

This product and the engine exhaust can expose you to chemicals which are known to
the state of California to cause cancer, birth defects, or other reproductive harm. For more
information on California Proposition 65, go to www.P65Warnings.ca.gov.
POLYCYCLIC AROMATIC HYDROCARBON WARNING
The air filter element and air box assembly may contain polycyclic aromatic hydrocarbons
(PAHs). Some PAHs may cause cancer. To avoid exposure to PAHs, wear gloves when
performing air filter maintenance.
● All information in this publication was based on the latest product information available
at the time of printing. The FNA Group reserves the right to change, alter, and/or
improve the product and this document at any time, without notice, and without incurring
any obligation.
● The pictures and figures in the manual should be used for reference only. There may be
differences between the pictures, drawings, figures, and the physical product.
● This pump may be equipped with a spark arrestor muffler. The spark arrestor must be
maintained in effective working order by the owner/operator. In the State of California,
a spark arrestor is required by law (Section 4442 of the California Public Resources
Code). Other states may have similar laws. Federal laws apply on federal lands.
Follow the steps outlined in this section to unpack and assemble your pump. If you have
any questions regarding the unpacking or assembly of your pump, please have your model
number and serial number ready, then contact customer support at 1-877-362-4271 or
email cservice@fna-group.com.
1. Place the shipping carton on a solid, flat surface.
2. Carefully cut the top of the carton open.
3. Carefully cut each corner of the carton from top to bottom.
4. Lay each side of the carton flat on the ground.
5. Remove everything from the carton.
Page 5
CALIFORNIA PROPOSITION 65 WARNING

DISCLAIMERS

UNPACKING