Charging The Unit - Yamaha WS-B1A Owner's Manual

Wireless speaker
Hide thumbs Also See for WS-B1A:
Table of Contents

Advertisement

Charging the unit

CAUTION
Use a commercially available USB power adapter that can output DC 5 V (2 A or more) when charging
the unit.
A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit.
1
1
Connect the Type-C connector of the USB cable to the USB port on this unit.
2
Connect the Type-A connector of the USB cable to the USB power adapter.
3
Plug in the USB power adapter to an AC wall outlet.
The power lamp glows orange and charging will start. When charging is completed, the power
lamp turns off.
NOTE
• When charging with a DC 5 V (2 A or more) USB power adapter, the charging time is approximately
three hours. Charging time varies depending on the usage environment and conditions.
• If the unit is charged while it is playing at a high volume, the remaining battery may decrease. Turn
down the volume or turn off the unit and wait until charging is complete, and then use it.
Do not charge the unit when it is wet. Charging with liquid or foreign matter
on the terminals may cause fire, explosion, liquid leakage, electric shock, or
malfunction.
USB cable (included)
5
En
3
3
USB power
adapter
(commercially
2
available)

Advertisement

Table of Contents
loading

Table of Contents