Mpeg-1; Mpeg-2; Dvd - Hauppauge WinTV-PVR-150 Installation And Reference Manual

WinTV-PVR Installation and Reference Manual
To configure the MPEG Quality Level, click on the PREF button
(Preferences menu) on WinTV2000, then Capture and then on the
MPEG tab.
Here are the video formats:
MPEG-1: VCD
MPEG-2: 2.0MB/sec (Full D1)
MPEG-2: 2.0MB/sec (Half D1)
MPEG-2: 12.0 MB/sec (Full D1)
MPEG-2: 12.0 MB/sec (CBR)
DVD Standard Play: Datarate 8.0Mb/sec, 720x480, 48.0 kHz stereo
DVD Long Play: Datarate 6.2Mbits/sec, 720x480, 48.0 kHz stereo
DVD Extra Long Play: Datarate 4.4Mbits/sec, 720x480 48.0 kHz stereo
SVCD Standard Play: Datarate 2.5Mbits/sec, 480x480 pixels
Note: CBR is constant bit rate, VBR is variable bit rate.
For creating Video CD's for playback on your home DVD player, chose
the MPEG-1 VCD format. If you would like to burn a DVD ROM, chose
DVD Standard Play, DVD Long Play, DVD Extra Long Play.
If you have a fast PC and would like the best video image quality, chose
MPEG-2 12.0MB/sec. If you have a slower PC, try the MPEG-2
2.0MB/sec format.
Once chosen, the format is set for both the Pause and Record modes.
You can change the format between recordings or after you have exited
Pause mode, but the format cannot be changed while Recording or
while in the Pause mode.
6-2