Pause Mode; Pause Buffer - Hauppauge WinTV-PVR-150 Installation And Reference Manual

Pause Mode

Pause Mode
Clicking the Pause button or OTP button on the WinTV2000 applica-
tion starts the Pause mode. The Pause Menu will drop down. (shown
above)
Note: It takes about 10 seconds to create a pause buffer. While the
buffer is initializing, do not click any buttons on the WinTV application.
Video
Delay
Skip ahead
Position bar
counter
10 seconds
Replay 10
seconds
Skip to
Skip to the
the end
beginning
Play
Rewind
Skip ahead
Replay 10
10 seconds
seconds
Fast
Pause
Forward 2X,
8X
Play forward
slow motion

Pause buffer:

The Pause buffer is space on your hard disk where video is stored dur-
ing the Pause mode. The maximum amount of time which your TV pro-
gram can be delayed is dependent upon how much storage space you
have set for the Pause buffer and which type of MPEG format you have
chosen. Both of these can be set in the MPEG settings menu (see the
section entitled "Configuring the format for MPEG compression").
To catch up to the "live" audio/video program, you can either exit the
Pause mode by clicking the TV mode button, you can click the Skip
button, which skips ahead 10 seconds per click, or you can grab the
Video Position indicator and move it to the right until it is at the end of
4-1